NemaTRUE行星減速機
除了標準的NEMA機架尺寸外，NemaTRUE現在還有三種新的公制尺寸可供選擇（60、90和115mm），而且還使用創新的Micron? RediMount系統進行了升級。 Thomson Micron現在可為您提供兼容RediMount的True Planetary減速機，它是符合您應用需求的經濟型解決方案。 NemaTRUE有多種減速比型號的常備存貨，可通過Thomson Micron Gearhead Express 程序即刻發貨。
產品介紹
技術規格：
| 隨時立即發貨 | ||
|---|---|---|
| 安裝類型 | 內聯 | 直角 |
| 精度 | 13弧分 | 13弧分 |
| 機架尺寸(mm) | 17, 23/60, 34/90, 42/115 | 23, 34, 42 |
| 轉矩承載能力 Nm (lb-ft) |
最大180 (133) | 最大 255 (188) |
| 可用比例 | 3:1, 5:1, 10:1, 15:1, 25:1 30:1, 50:1,100:1 |
1:1, 2:1, 3:1, 4:1, 5:1P, 5:1T, 6:1, 9:1 10:1, 12:1, 15:1, 20:1, 25:1, 30:1, 40:1 50:1, 60:1, 75:1, 90:1, 100:1, 120:1 125:1, 150:1, 200:1, 250:1, 300:1 400:1, 500:1 |
| 徑向承載能力 N (lbf) |
最大 3730 (839) | 最大2900 (652) |
| 安裝系統 | RediMount? | RediMount? |
NemaTRUE? 亮點
- 密封深溝滾珠軸承可提供高徑向負載承載能力。
- 55-60 鋼齒輪可提供超高抗磨損能力，并增加了空隙的完整性
- 密封深溝滾珠軸承可與太陽輪的精確對齊。
- RediMount?系統可提供無誤差電機安裝
- 陽極氧化鋁制外盒可減輕重量，并防止腐蝕
視頻：Thomson離合器、電磁制動器和減速機技術
Thomson 電磁制動器/離合器產品線經理John Pieri介紹了摩擦式離合器和扭簧式離合器及其作為工業解決方案的各種應用。他還介紹了在某些特定場合下摩擦式離合器的使用方法和時間以及在其它場合下 扭簧式離合器的使用方法和時間。他還對減速機進行了介紹，并講解了減速機在應用設計方面的作用。
產品資料
手冊
| Micron Guide Selection Guide | 257 KB | |
| Micron MOTIONEERING® | 347 KB | |
| TRUE Planetary? 減速機 | 1505 KB | |
| True Planetary? Gearheads | 1577 KB | |
| True Planetary? Gearheads | 917 KB |
產品目錄
| True? Planetary Gearheads | 7421 KB | |
| True Planetary? Gearheads | 7699 KB | |
| True Planetary? Gearheads | 6956 KB | |
| True Planetary? Gearheads | 12081 KB | |
| True Planetary? Gearheads | 8034 KB |
手冊
| TRUE Planetary? Gearheads | 430 KB |
產品選型
Not finding the right gearhead for your needs? Visit Micron Motioneering, our full-featured sizing tool!
Family
Backlash
Angle
Frame Size
Slim Line
Ratio
Gearing
Duty Cycle
Output Shaft: Single, Dual or Hollow
Redimount
Select other checkboxes to view available options
比較
3D 模型
Family
- ValueTRUE (VT) - Helical Crowned Gearing
- UltraTRUE (UT) - Helical Crowned Gearing
- XTRUE (XT) - Spur Gearing
- DuraTRUE (DT) - Spur Gearing
- EverTRUE (ET) - Continuous Duty, Spur Gearing
- AquaTRUE (AQT) - Stainless Steel Construction, IP66, IP67 and IP69K Protection. Perfect for washdown applications, Spur Gearing.
Frame Size
Roughly the width of the gear head.
Ratio
Input speed vs. output speed
Output Shaft: Single, Dual or Hollow
- Single - One solid output shaft
- Dual - Two solid output shafts. Only available on right angle units
- Hollow - Gearbox has a through bore for clamping onto a shaft. Only available on right angle units.
Angle
- Inline - Motor and output shaft will be in-line with each other
- Right Angle - Motor will be at a 90 degree angle from the output
Backlash
Backlash, sometimes called lash or play, is lost motion caused by space between the gear teeth.
Gearing
Helical gears are known for their quiet and smooth operation along with their ability to transmit higher loads than spur gears.
Peak Torque
Allowable momentary peak torque for emergency stop or heavy shock loading.
Duty Cycle
Continuous Duty - Able to run non-stop
Redimount
The RediMount is the adapter that goes between the Motor and the Gearhead. Different RediMount numbers have different dimensions. If you need assistance in selecting a RediMount to fit your motor contact customer support or visit Micromotioneering for assistance.
All Micron gearheads use the innovative RediMount? system, the most flexible mounting system available today. This mounting system allows easy and error free mounting to any motor on the market in just three easy steps - simply align, mount and tighten.
Slim Line
More compact version.